Hello,
I'm trying to make a VPN with two RV215W routers.
To do this, I've made a test configuration with a direct cable between router and a fixed IP for each before using internet.
These fixed address are 192.168.10.1 and 192.168.10.2.
Subnet are defined in each router as 192.168.1.0/24 and 192.168.2.0/24.
I've configured IPSEC with these address and it's written "Established" on each side on web interface.
But I can't ping an address from a subnet to another one.
I try to declare static routes with no success.
Can you help me to define the necessary for this configuration ?
Mathieu L.
