need sample working config for RV180 L2L ASA5505

[ronald.sibarani1]

Hi, I've been trying to connect L2L betwen RV180 and ASA5505 but no succeed.

I can do RV180 to RV180 l2l with one of it on Aggresive mode.

Can someone help brighten my day with a working configuration sample of RV180 L2L ASA5505?

Cheers,

[jonatrod]

Hi Ronald, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I will be glad to help you with your configuration. Let me check if I understood, you want to connect VPN site-to-site between RV180 and ASA5505 enterprise, it is possible, you need to configure both routers with the same attributes (Encriptation, Authentication, Group and both address information need to be crossed)

I found information, it could be useful to your configuration, http://www.cisco.com/en/US/docs/routers/csbr/rv180w/administration/guide/rv180w_admin.pdf in page 106 and few configuration steps to configure your RV180, http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2264, also set your configuration in main mode, all this information is regard to RV180 VPN configuration, to find support for your enterprise device I advise you to port your question here https://supportforums.cisco.com/community/netpro/security/vpn

I hope you find this answer useful,

*Please mark the question as Answered or rate it so other users can benefit from it"

Greetings,

Johnnatan Rodriguez Miranda.

Cisco Network Support Engineer.