openvpn connection issue to rv160

[bilvi]

I can connect and ping the vlan 1 IP address, but I can not ping or access anything else on the network.

Network is 192.168.1.X openvpn I get 10.1.4.2 assigned on the client. 

Seems like a routing issue but I thought as long as I have Tunnel Mode > Split > 192.168.1.0 > 255.255.255.0

VLan 1 is a static ip of 192.168.1.132/24  255.255.255.0 DHCP relay 192.168.1.74

Any Suggestions

[balaji.bandi]

I can connect and ping the vlan 1 IP address, but I can not ping or access anything else on the network.

what do you mean by anything else in the network ?  Does VLAN 1 IP address mean you are able to ping 192.168.1.132?

[bilvi]

correct I can ping 192.168.1.132 from the client and get a reply but can not get anywhere else.   On the router it self I can ping the other places I want to get at and get a response. I have a internal webserver at 192.168.1.164 that the router can ping but the client can not.

[bilvi]

I assume it has to do with the routing as the RV160 is not the default gateway?

[balaji.bandi]

ok trying to understand the issue, before connecting to VPN, what is the Local PC IP address?

if the Local LAN and remote LAN have the same IP address?

[bilvi]

I am testing with my phone with wifi turned off so just the carrier 5g network.   I connect via the openvpn android client and it gets a IP of 10.1.4.2 the ip address of the vlan on the rv160 is 192.168.1.132.  After I connect I can ping 192.168.1.132 from my phone but I can not access a local webserver on the network with the ip of 192.168.1.164.  I can ping 192.168.1.164 from the rv160 diag interface so I know the router can see that address, but I can not see it through the vpn from my phone.   On my network my primary dhcp server address is 192.168.1.74 so I have dhcp disabled on the vlan1 interface on the rv160.

[niskevdsmet]

I have the same issue. 
My OpenVPN client gets an IP address from the pool (10.8.1.x).  I can ping to the RV160, but I can not ping devices behind the RV160 router.  All devices on the Vlan have RV160 as default gateway.
Strange...If I add an ACL (any -any) on the RV160 router than I can ping devices on VLAN from my  OpenVpn clients, but from what I have read, you should  not install ACL 's in order to work with OpenVPN clients ??
RV160 Firmware version 1.0.00.17