I'm getting a Cisco 2901 router set up and attempting load balancing/link aggregation and/or fail-over for my dual WAN connections. Being new to Cisco's IOS software, I would prefer to do my configuration using the Configuration Professionsal GUI. As I understand, the Performance Routing option will help me set this up but I don't have that option available in Configuration Professional; any ideas? I downloaded the most recent version of CP (version 2) I believe; I've reviewed over the often referenced article on this feature at: Cisco Performance Routing and reviewed the Cisco Feature Navigator available at http://www.cisco.com/go/cfn for my IOS release; the feature I'm looking for is documented in a flash presentation at http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/scrcst/PfR/CCPPFR.swf (screenshot below):
A summary of the key results of the IOS "show version" command on this router are:
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 30-Sep-09 05:30 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M1, RELEASE SOFTWARE (fc1) BPRouter uptime is 5 days, 23 hours, 43 minutes System returned to ROM by power-on System restarted at 11:34:47 PCTime Wed Dec 23 2009 System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M.bin"
Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FTX134981A3
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2901/K9 FTX134981A3
Technology Package License Information for Module:'c2900'
----------------------------------------------------------------
Technology Technology-package Technology-package Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9 uc None None None data None None None Configuration register is 0x2102
Accepted Solutions
