Routers - Small Business

I have several Mac based applications that are not working with UPnP on my RV082 router. It's not listed as a compatible router on Apple's MobileMe Back To My Mac hardware compatibility list. Is there a way to manually configure port forwarding for t...

Here's what I want to do:Allow a remote user to SSL VPN into my network, but that user only has access to a specific machine and specific ports on that machine.For example, presume the machine on my local network is at 192.168.1.5 and I only want to ...

I have an RV042 that has a VPN gateway connection that periodically just dies. The connection will be fine for a day and then simply die. I was previously using a wrv200 gateway to gateway and had no issues at all. The issues only came about when I r...

Hi, I'm trying to establish a tunnel between two Cisco WRV210 VPN routers.They are set up like this:   Router A - Internet - NAT-Router (unknown) - Router Bwhere Router A and B are the Cisco WRV210 models.and where Router A has IP "Router_A_IP"I set ...

I added an alternate RDP port number for a machine. Port 8080, reboothed the server. I set port forewarding of the public side 8080 to the private side 8080 to 192.168.1.100. It works one day the next stops. When I try to RDP from work to my foreward...

We have 4 locations running RV042 or RV082. We have an RV016 at the central site. Using a Cisco hosted VoIP system with Cisco 7940 and 7960 IP phones. One locations is having sporadic problems losing calls in one direction. The caller can hear the si...

I activated a 30 day trial of ProtectLink Gateway on my RV042, but after 4 days the router is just blocking all websites. In fact, I bought 7 units of the RV042 to connect gateway-to-gateway our 6 branch offices. I don't know why the routers work rig...

I was wondering if somebody could give a link for instructions on how to use the "backup" VPN feature on a RV082 router.Currently we have a gateway-to-gateway VPN established between two RV082 routers in two different locations (using only one WAN po...

Hi there,I changed the  BEFVP41 with WRV220 and configure the VPN  the same way, succeed to establish IPSec VPN connection with TGB VPN client with no problems but now Remote Desktop Doesn't work. I changed the firmware that didn't help. That didn't ...

I'm trying to get an IPSEC VPN up using CCA 2.1. I noticed in the console window this after attempting to create the VPN2009.12.03-03:42:04-PST INFO isATMConfiguredForPPPoAandPPPoE() for ATM02009.12.03-03:42:04-PST DEBUG isATMConfiguredForPPPoAandPPP...

Hi,I've got an RVS4000 at a remote site where I need to route a pair of subnets to our primary office location through the VPN interface.I have the link up and running, and can ping from a system in the remote site to one our primary site's networks,...

I need to write an application that will access the router remotely and import the exp config file. Is there a SDK or web request on the router or anything I can do to accomplish this? We have hundreds of routers to go through an production line to i...

Hi,I have problems with SA540 and NAT. I’m trying to use three public IP-addresses. One is for SA540, one is for Exchange-server and one is for Citrix server. I have read the SA540 Admin Guide and follow the instructions but the NAT doesn’t work. I c...

HelloWe bought 5 WRV-210 Router.We have the same problems with all this 5 routers.In our company, we use a WEP wireless security with a key index 2 and encrypted in 128bitwith WRV-200 there are no problem, but with WRV-210 we can'tWe can't put a key ...

How do I connect to VPN server behind RVS4000 ?Situation - Have two routers with static IP's  on WAN side - one is RVS4000 (             V1.3.0.5 ) I want to use to access VPN server.Lan side of routers - 192.168.0.1 on gateway (DHCP server) and 192....