Solved: port forwarding on Cisco RV016

pperez.spcc · ‎10-07-2014

Hi

some one know how open a specific port on RV016?. I try different ways, but i dont get with the correct.

i have to open ports for the security cameras, and then i can see of outside of my LAN.

if it possible, can one of you, show me how do it please.

best regards

Paris Pérez

V K Moorthy · ‎10-07-2014

Hi,

if your accessing the security camera in LAN with port 80 ( considered ).

you need to configure the UPnp configuration under setup menu:

Add new service with name 'CAM1' with internal port 80 and external port 81

and configure the UPnp by enabling see the page no:48 in below link.

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG_78-19576.pdf

V K Moorthy · ‎10-07-2014

Hi,

if your accessing the security camera in LAN with port 80 ( considered ).

you need to configure the UPnp configuration under setup menu:

Add new service with name 'CAM1' with internal port 80 and external port 81

and configure the UPnp by enabling see the page no:48 in below link.

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG_78-19576.pdf