02-28-2018 12:39 AM - edited 03-21-2019 11:05 AM
Hi all
Until now I had 2 RV220W connected together with IPSec VPN for backup purposes. They ran well.
Now Our Swisscom Internet Provider had changed the Router (Centro Business 2.0 Router) which is accepting only the parameters in the appended picture. I tried everything I could but the RV220W will not connect.
Does somebody have an idea how I could get the RV220W connected or, since the RV220W is out of Service, a replacement for the RV220W?
Thank you
Solved! Go to Solution.
06-04-2018 01:53 AM
Thank you all for your answers
Unfortunately this will not help me because my Online Provider Swisscom does only support IKEv2
05-25-2018 01:46 AM - edited 05-25-2018 01:56 AM
Hi,
My name is Iliya Gatsev from Cisco Technical Support Team.
You can take a look on our new RV340/RV345 series routers:
Please rate this post or marked as answered to help other Cisco customers.
Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO
05-25-2018 05:18 AM
Hi
does the RV340 at least support DH Group 14 or one of the Parameters in the Picture?
Thank you
06-03-2018 09:55 AM - edited 06-03-2018 09:58 AM
Hi,
IKEv2 on RV340/RV345 is not supported, but if you wish you could take a look on the online emulator for RV340 and navigate to VPN -> IPSEC Profiles:
Please rate this post or marked as answered to help other Cisco customers.
Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO
06-03-2018 10:46 PM
06-04-2018 01:53 AM
Thank you all for your answers
Unfortunately this will not help me because my Online Provider Swisscom does only support IKEv2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide