Hey guys,
Can anyone answer if the following setup is supported on the RV120W or the RV220W.
I would like to have two VLAN's (on wireless and lan), one for VPN traffic and one for public traffic.
VPN Traffic:
- VPN client on the router to connect to the main office
- A VLAN that routes all traffic through the VPN
- Static DNS servers on this VLAN (if possible)
Public:
- A VLAN that routes all traffic directly out
- Dynamic DNS Servers on this VLAN
- Firewall between the two VLAN's to allow public machines access to a few local services on the VPN network. (eg. printers, file share)
