Buy or Renew
Buy or Renew
NOTICE: You can now engage in the community. Learn about the great new Cisco Umbrella content.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1100
Views
0
Helpful
2
Replies

RV016 Setup

charliecutting
Level 1
Level 1

‎12-22-2011 11:00 AM

I just got an RV016 SB Router and am having trouble with the configuration.

I have two static IP's coming in on a Charter Cable SMC modem.  1 is on Port 1 of the modem one is on port two of the modem.

I can only get the router to work with one connected,

IP 1

75.138.54.66

Subnet                     

255.255.255.252

Gateway

75.138.54.65

IP2

68.115.146.190

Subnet

255.255.255.252

Gateway

68.115.146.189

I connect the modem ports to internet 1 and internet 2 of the RV016 and  use the Wizard (multiple times) it will not work.  I have a web-server that needs the 190 IP pointed to it and set it up with a static IP of 192.168.1.80 and plugged it into the DMZ port and followed the instructions for that.  I am obviously doing something wrong.     Any advice appreciated.

Thanks

Labels:
0 Helpful
2 Replies 2

mpyhala
Level 7
Level 7

‎12-22-2011 10:45 PM

Charlie,

Thank you for posting. Browse to System Management-> Multi-WAN and change to Load Balance (Auto Mode). This will allow both WAN ports to be active simultaneously. Please let us know if this works or if you need further assistance.

0 Helpful

charliecutting
Level 1
Level 1
In response to mpyhala

‎12-23-2011 05:12 AM

Thank You Sir.  I will try it and report back.

0 Helpful
Customers Also Viewed These Support Documents