12-22-2011 11:00 AM
I just got an RV016 SB Router and am having trouble with the configuration.
I have two static IP's coming in on a Charter Cable SMC modem. 1 is on Port 1 of the modem one is on port two of the modem.
I can only get the router to work with one connected,
IP 1
75.138.54.66
Subnet
255.255.255.252
Gateway
75.138.54.65
IP2
68.115.146.190
Subnet
255.255.255.252
Gateway
68.115.146.189
I connect the modem ports to internet 1 and internet 2 of the RV016 and use the Wizard (multiple times) it will not work. I have a web-server that needs the 190 IP pointed to it and set it up with a static IP of 192.168.1.80 and plugged it into the DMZ port and followed the instructions for that. I am obviously doing something wrong. Any advice appreciated.
Thanks
12-22-2011 10:45 PM
Charlie,
Thank you for posting. Browse to System Management-> Multi-WAN and change to Load Balance (Auto Mode). This will allow both WAN ports to be active simultaneously. Please let us know if this works or if you need further assistance.
12-23-2011 05:12 AM
Thank You Sir. I will try it and report back.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide