cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1632
Views
0
Helpful
3
Replies

RV016 VPN - Can't access network.

I just setup a group VPN on my RV016 multi-wan router. I have been able to connect and browse the routers administrator page however I can't access anything else on the network.

I have tried disabling the firewall and changing many other settings but with no luck.

VPN.png

I removed the domain name and preshare key settings just for this screenshot.

I am using the shrewsoft client to access this VPN and the settings are as follows:

Shrewsoft.png

Once the VPN connects I am able to ping the routers local IP but anything else on the network is unpingable by IP and hostname.

Any help is much appreciated, thanks.

3 Replies 3

jeffrrod
Level 4
Level 4

Dear Patrick,

Thank you for reaching Small Business Support Community.

If you are looking to setup a Client to gateway VPN please check on the below document for guidelines;

http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=624

QuickVPN application notes;

http://www.cisco.com/en/US/docs/routers/csbr/app_notes/QuickVPN_an_OL-25680.pdf

If you are looking for a Gateway to Gateway VPN setup please refer to the below document;

http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=3294

Please do not hesitate to reach me back if there is any further assistance I may help you with.

Kind regards,

Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer

*Please rate the Post so other will know when an answer has been found.

Jeffrey Rodriguez S. .:|:.:|:. Cisco Customer Support Engineer *Please rate the Post so other will know when an answer has been found.

Thanks for the reply.

The setup document provided me with no help, I had all that information already.

As for QuickVPN we tried using it however it doesn't suit our environment and feel getting our current VPN client to work is preferable.

Bump