RV042 IP Forwarding Issue

[tim.ragin7]

I have an RV042 router that I am using to forward traffic from external IP addresses to internal private devices. I have a server with two NICs that need to be on different subnets. So my question is, how can I forward the traffic from the public IP address to a private IP address that is on a different subnet than the router?

(Router IP : 10.10.10.1, 2nd NIC: 10.10.1.104)

I have tried setting up static routing. This allows me to ping the .104, but I still can't forward to it using 1 to 1 NAT. If it matters, the IP on the first NIC is 10.10.10.104.

If you need me to clarify anything, just let me know. Any help would be greatly appreciated.

[jonatrod]

Hi tim.ragin7

My name is Johnnatan and I am part of the Small business Support community.

I have a couple of questions for you,

Do you have a switch between the router and the server?,

Could you  send a picture with your topology?

Are you using Vlan´s, are they allowed in the NAT configuration?

Thank you.

I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.

Johnnatan Rodriguez Miranda.

Cisco Network Support Engineer.Good morning  gatorbyte

[Te-Kai Liu]

Which firmware are you using on RV042?