11-03-2011 09:33 AM
I have a RV042 using (for now), just the single WAN interface. I am trying to forward all packets to port 9000 from the WAN to a single IP address on the network. I've set up both forwarding rules under Setup -> Forwarding and under the Firewall -> Access Rules.
I cannot connect to my device from the outside world, however. Is there something I'm missing?
11-03-2011 09:47 AM
Scott,
Can you please let me know if you are able to access the device via the local Lan IP Address with the required port number? Also, can you please let me know what firmware version you are running on the device?
Thanks,
Blake Mereby
11-03-2011 10:09 AM
I can connect locally no problems at all
Firmware Version: v4.0.2.08-tm
11-03-2011 11:37 AM
FIxed.
Problem was upstream. Router above was set to put the RV04 in the DMZ, but the config didn't stick. Re configured that router and now it works...
Thanks.
11-09-2011 01:14 PM
Thank you for the update.
Thanks,
Blake Mereby
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide