RV042G VPN Client to Gateway not working

[ronaldpomp]

I am trying to setup VPN on my new RV042G, but can not get it to work.

I try to use client to gateway and want to connect my laptop to the router with a vpn client like screwsoft or greenbow. 

What way i configure it, it wont connect. after doing some port scans i found out that it does not open any ports. after disabling the firewall it still seems not a suitable is opened. (i would expect 500 for ipsec). 

can anybody help me out here? only pptp seems to open up ports when enabled, but i don't want to use that. 

[Mehdi Boukraa · Accepted solution]

Hi Ronald,

Please found the attachment file how to configure ShrewVPN with RV0xx, just to be sure that the configuration is fine on RV042 and shrewVPN

Please rate this post or marked as answered to help other Cisco Customers

Greetings

Mehdi

[ronaldpomp]

Thanks Mehdi,

It works now :). 

I still needs to figure out how to force all traffic through the tunnel and how traffic reacts with regards to vlans and firewall rules. If you have any tips/tricks please feel free to let me know. 

Thanks again for the guide, really appreciate it. 

[nima]

Thanks Mehdi,