Dear all,
with a RV042G, actually installed with a fixed PUBLIC IP ADDRESS I get this issue:
- from a remote 3G router, I can connect with IPSEC to the RV042 and accessing the internal LAN IP addresses (from RV042 to 3G router and viceversa - gateway to gateway VPN tunnel)
- at remote 3G router (with dynamic IP address - no dyndns support due to network operator IP masquerating policy), there're differents SERIAL DEVICES SERVERS that receive RS232 data, that I can only access locally and remotly by the VPN
The issue is:
I'd like to connect with my laptop,using a second mobile (or second WAN with dynamic IP) to the LAN segment on the 3G remote router and get access to the serials devices and also to remote desktop service on somes PCs
Using SmartVPN, I can only connect to the RV042G LAN segment.
My conf:
RV042G LAN == 192.168.100.0/255.255.255.0
RV042G is used as FIXED PUBLIC IP GATEWAY
REMOTE 3G ROUTER LAN == 192.168.10.0/255.255.255.0
Waht can I try to do?
Respectfully
