Hello, I found the odd place to put port translation, however it only seems to work for the primary IP address on the router.
My setup with muliple IP addresses
192.168.10.11~37 =>202.50.74.195~212 (external IP addresses are fake)
Port 3333 is forwarded in the GUI for the first external IP 192.168.10.11 = 202.50.74.195 - It works fine
In UPNP area (function NO)
3333->3389->192.168.10.35 (This would be for External IP 202.50.74.209, given by the 1-1 NAT)
You would think. But happens when I try to remote to the primary IP handled by the gui, (202.50.74.195->192.168.10.11) which was working. I am redirected to this other server on (202.50.74.209->192.168.10.35)
So, is this port translation only good for the ONE primary default IP Address taken by the router?
How do I translate ports for my other 26 IP addresses?
This is easy in Sonicwall, DDWRT and Linux IP Tables, but I thought I would try the RV082 because I need to replace 50 Sonicwall and the price point and features appeared good.
Any help greatly appreciated. Even if just to tell me to return it and get a better router. If so, what SMB Cisco router would be a man's router, and not a sissy router that can handle port translation for multiple IP addresses. PS> These RV082's are not cheap, but 1/3 the cost of the Sonicwall.
Thanks!
