Hi Cisco User,
Did you reset according to the instructions in the Quick Start Guide?
• If you are experiencing extreme problems with the Cisco RV120W and have
tried all other troubleshooting measures, press and hold in the RESET
button for 10 seconds. This restores the factory defaults and clear all of the
Cisco RV120W settings.
I usually recommend 12 seconds, no longer than 15. If that fails to reset the device, power it on while holding the reset and continue to hold it for about 45 seconds, then release. If it still won't boot, contact support for assistance:
www.cisco.com/go/sbsc
- Marty