Greetings,
Has anyone ever been able to use an ASA5505 (main office) and RV120W (remote office/ teleworkers), with an IP phone to work?
The main office has the servers including an Astrisk phone server, The main office's ASA5505 is running 8.2(1).
We are testing out 2 sites with RV120W devices and getting the same results. All the other tunnel routing behaves as expected. The phones will ring and the remote can hear. The other side of the call can not hear the remote site. We've turned off SIP ALG just to get to phones to register. We set the ASA5505 to no filter for everything and no inspect for most.
Has anybody got this hardware to work?
Thanks
Bob
