Solved: RV180 portforwarding trouble

appliwebonline · ‎01-29-2013

Hello from france,

sorry for my english

I have some troubles to whith my RV180

Port fowarding doesn't work properly

My routeur :

Nom d'hôte:	router0C62BC	Modifier
Version du firmware:	1.0.1.9
Numéro de série:	SER161105MI

I created a custom service:

Custom Services

Custom Service Table

Name

Type

ICMP Type / Port Range / Protocol Number

N4100

TCP

8010 - 8010

I allowed port forwarding :

Port Forwarding

Add / Edit Port Forwarding Configuration
Action:
Schedule:
Service:
Source IP:
Start:	(xxx.xxx.xxx.xxx)
Finish:	(xxx.xxx.xxx.xxx)
Destination IP:	(xxx.xxx.xxx.xxx)
Internal Port:	(Range: 1 - 65535)

And enabled it

Port Forwarding

Port Forwarding Rule Table

Action	Service	Status	Source IP	Destination IP	Internal Port
Always Allow	N4100	Enabled	Any	192.168.0.5	8010

but i wasn't able to connect to my host 192.168.0.5 from WAN, it's works fine on the LAN.

So i tried to put my host's IP 192.168.0.5 as DMZ

DMZ Host

DMZ Host Configuration

DMZ:

Enable

IP Address:

(xxx.xxx.xxx.xxx)

But it still does not works.

This is the information i have in Debugging journal, but i don't know what to do whith it :

(i just clear my IPadress in blue)

Tue Jan 29 17:08:52 2013(GMT+0100) [rv180][Kernel][KERNEL] [ 5083.320000] WAN_LAN[ACCEPT]IN=ppp1 OUT=bdg1 SRC=XXX.XXX.XXX.XXX DST=192.168.0.5 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=61335 DF PROTO=TCP SPT=2943 DPT=8010 WINDOW=65535 RES=0x00 SYN URGP=0

Could Someone please help me ?

Zorglub75 · ‎01-29-2013

Hi,

I have a similar problem, which seems to be a well known bug.

I also have several other problems regarding firewall rules.The RV180 is full of bugs.

Some people here have been expecting a 1.0.2.2 firmware which is supposed to correct those bugs but we are still waiting.

View solution in original post

Clayton Sill · ‎01-29-2013

Hello Laurent,

Sounds like you are running into the port forwarding bug. Werid part about this issue is port forwarding works for some and not others. It could be with using PPPoE connection but not 100% sure on that. You could give Cisco support a call and they can get you in the direction to get a beta firmware to resolve the issue. I've started to see a couple people posting on the forums that the beta firmware is resolve the issue.

Cisc SBSC Numbers:

http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Hope that helps!

Thanks,

Clayton Sill

View solution in original post

Zorglub75 · ‎01-29-2013

Hi,

I have a similar problem, which seems to be a well known bug.

I also have several other problems regarding firewall rules.The RV180 is full of bugs.

Some people here have been expecting a 1.0.2.2 firmware which is supposed to correct those bugs but we are still waiting.

Clayton Sill · ‎01-29-2013

Hello Laurent,

Sounds like you are running into the port forwarding bug. Werid part about this issue is port forwarding works for some and not others. It could be with using PPPoE connection but not 100% sure on that. You could give Cisco support a call and they can get you in the direction to get a beta firmware to resolve the issue. I've started to see a couple people posting on the forums that the beta firmware is resolve the issue.

Cisc SBSC Numbers:

http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Hope that helps!

Thanks,

Clayton Sill

appliwebonline · ‎01-30-2013

Hello Clayton,

Thank you for your help.

I just called cisco support , they opened a ticket they have escalated to level 2 to see if they could send me a beta firmware to solve the issue.

Best Regards

Laurent Esteban