RV180 WAN traffic meter and maxium throughput

[kimmoriesk]

When WAN traffic meter is enable on RV180 router maxium throughput drops to 40Mbps from ~120Mbps

Enabling WAN traffic meter is needed to get SNMP data from WAN port.

[Tom Watts]

Hi Kimmo, the WAN traffic meter limitations is a known issue. If you need further feedback, please contact the small business support center.

http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

-Tom
Please mark answered for helpful posts