06-22-2015 10:33 AM
I followed the instructions to setup the Cisco QuickVPN (Basic). I can ping WAN and Router's LAN 192.168.1.1 from remote computer, but can't ping the device 192.168.1.137 under the router's LAN.
Thanks in advance.
Solved! Go to Solution.
06-23-2015 09:46 AM
Thanks Tom!
Hi FC, if this is deed resolved your issue, would you kindly endorse the answer as correct in order to ensure this is visible to all users. And also, would love to get your feedback on your experience - along with any recommendations on how we might be able to improve yoru experience.
Thanks in advance for your help,
Glenn
06-22-2015 05:36 PM
Hi FC, from the RV220W can you ping the 192.168.1.137 station?
Can you ping the 192.168.1.37 station from another station on the LAN?
The computer you connect from QVPN, is the LAN also 192.168.1.x or something different like 192.168.2.x?
06-23-2015 09:05 AM
Thanks for your reply.
I solved the problem with your reminder.
Thanks again.
06-23-2015 09:46 AM
Thanks Tom!
Hi FC, if this is deed resolved your issue, would you kindly endorse the answer as correct in order to ensure this is visible to all users. And also, would love to get your feedback on your experience - along with any recommendations on how we might be able to improve yoru experience.
Thanks in advance for your help,
Glenn
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide