02-19-2014 07:17 AM
Hi all,
Does anybody know how can I update a top domain for the DynDNS service?
I am using my own domain name, which is being handled by DynDNS - btw, it's a little frustrating that I had to transfer it from no-ip because Cisco only supports DynDNS.
So, going to the Dynamic DNS configuration page I select: DynDNS.org and for the host name I have three fields. The documentation sais:
The problem is that I don't want to update a hostname but the whole domain (e.g. mydomain.net not gateway.mydomain.net).
I tried:
- leaving the first field empty ->error, cannot save
- using * for the first field - saves but gives the following error: No internet connection or DDNS service is disabled
- using @ for the first field - saves but gives the following error: No internet connection or DDNS service is disabled
Thank you,
Andrei
10-11-2014 04:22 AM
Don't hold your breath :)
10-16-2014 03:32 AM
No reaction from Cisco about this issue. :-(
The last Firmware 1.1.1.06 is from Dec. 2013.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide