Hello,
i have a problem with network based on two gates.
Gate 1 is a ISP router with DHCP and access to internet, IP of device: 192.168.0.1/24
Gate 2 is a another ISP access modem connecting directly to VPN of my company, IP of device: 192.168.225.30/27 (vpn subnet 192.168.0.0/16)
Idea is to connect devices from subnet 192.168.225.0/27 to reach internet access through gate 1 but also through gate 2 to vpn subnet 192.168.0.0/16 if necessary.
I set 192.168.225.1 on RV320 LAN interface.
I assume, i should connect Gate1 to WAN1 and Gate 2 to LAN port, and next set up a static route 192.168.0.0 255.255.0.0 through 192.168.225.30 ?
Advanced Routing - Working mode should be set for Router or Gateway ?