I just bought an RV325 router. so far its working great except for one issue I cant seem to figure out.
I can create outgoing access rules just fine, but when i try to create an incoming access rule the router
appears to ignore the rule. Here is what i am trying to do
I have an ftp server setup on my LAN. If I setup a port forward to forward port 21 to my ftp server I can connect
from the internet just fine. What I would like to do tho is restrict it so that only 1 ip address would be allowed in.
The port forwarding page doesnt give me the option to specify a single IP address. So I then try to create the same
rule on the firewall -> access rules page. When i recreate the same rule there I cannot connect from the internet.
I made sure to put the newly created rule with a priority of 1. I have also tried changing the rule so that ANY ip
address and ALL ports were being sent to my ftp server and it still wouldnt let me in.
Source interface - WAN1
Source - ANY
Service - 1-65535
Destination - 10.0.40.104
I am out of ideas why this would work for port forwarding but not on the firewall access rules page. Is it a bug? or do
I need something else configured? Im attaching screenshots of the port forwarding rule and the firewall rule
Thanks!