11-28-2022 11:22 AM
Hello everybody!
I am newbie at IT so maybe this will be the stupid question. I have PPTP connection to my RV340W. Normally I connect through VPN to my VLAN1 192.168.11.0/24 network and there is no problem. But if I want to connect through VPN to other VLANx it is not possible. Internally I can connect through vlans without problems (inter-vlan routing I guess is working). I tried to add access rules: allow WAN1-VLANx any traffic and allow VLANx-WAN1 any traffic, but it doesnt resolve the problem. Is there any special thing I must do to make it work?
Tnx.
11-28-2022 03:16 PM
check below video : (verify the default gateway config)
11-29-2022 09:00 AM
Thanks! I tried this approach, but it didnt worked for me. I can ping only router, but for some reason i cant ping the device.
e.g. if my gateway is 192.168.9.1(dhcp) on vlan2 and device is 192.168.9.60, i can ping only 192.168.9.1
I can ping all the vlan gateways without any pptp tunnel splitting.. but ping only gateways(dhcp servers). But acces only devices which are on vlan1, the default.
11-29-2022 02:07 PM
try traceroute from vpn also from device to VPN PC see where it dropping.
i am sure something related to routing
11-30-2022 12:30 AM
Found problem on local device configuration.. So this problem is solved for now. Tnx for helping.
12-01-2022 01:15 PM
Glad you were able to fix the issue and appreciate your input for the community we mark as resolved now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide