10-23-2012 05:51 PM
When my RV016 is restarted (for instance after a power failure) the gateway to gateway VPNs do not connect. I have to go the router's VPN summary page and click on connect to get them started. Is there any way for that to happen automatically?
Solved! Go to Solution.
10-23-2012 09:43 PM
In the advanced section of the tunnel configuration, if the DPD and Keep Alive options are checked, RV016 will try to reconnect automatically.
10-23-2012 09:43 PM
In the advanced section of the tunnel configuration, if the DPD and Keep Alive options are checked, RV016 will try to reconnect automatically.
10-24-2012 03:23 PM
Thanks for the quick answer. That solved my problem. I have VPN's connecting 4 different routers from various companies, and I think the RV016 was the easiest to set up. This was the only problem. I think that the keep-alive and DPD settings are important enough to be on the main VPN setup page, not the advanced page. I didn't even look at the advanced page because the VPN setup was so easy.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide