08-07-2015 06:35 AM
I am trying to create a site-to-site VPN connection using two RV180W routers. Where can I find some detailed instructions?
Thanks
08-07-2015 06:42 AM
Hi
This is the guide provided by Cisco , go to page 115 of 187 top left
Site-to-Site Access with Gateway-to-Gateway VPN
http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv180w/administration/guide/rv180w_admin.pdf
08-07-2015 07:46 AM
Thanks for the reply Mark. I just found out from my supplier the RV180 has been discontinued. Since this is what I have at one site, is it ok to purchase any RV router like the RV320 DualWAN VPN Router for example and use that at the other site?
Thanks
08-10-2015 01:00 AM
Yes 320 is a newer model with more features such as load balancing, dual wan etc it will work fine
the 180 is end of sale with Cisco now thats probably why the wouldnt sell it to you
08-13-2015 11:59 AM
When configuring a site-to-site, in the advanced VPN Setup is a check box for auto initiate. Should I check that off on the remote side?
Thanks
08-14-2015 04:24 AM
You should not need anything in the advanced tab to get it going there more extra options if required like some scenarios may require NAT traversal depending on the network , the vpn should still come up with just standard settings
08-14-2015 04:41 AM
I am having a lot of trouble with my configuration. Would you take a look at my thread located here:
https://supportforums.cisco.com/discussion/12581466/vpn-help-rv180-rv320
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide