We are using several SGE2000P switches and SPA502G IP-Phones.
Config setting:
Vlan 10 PC-Data
Vlan 20 Voice
The Phones are width a trunk connected to the switch and the PC's are connected to the Phones.
Vlan 10 untagged, Vlan 20 tagged.
The Voice Vlan is on Layer-2 connected to the VoIP-router (third-party)
Now we want to implement QOS for this configuration.
We want to use a simple QOS Config, like just give Voice-Vlan high Priority.
But I can't find this function.
Can anybode help us how setup QOS for the switches and Phones.
Kind Regard,
Ditmar Laros
The Netherlands
