cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2637
Views
0
Helpful
2
Replies

SRP527W Ethernet WAN with PPPOE

Gary Turner
Level 1
Level 1

Hi

We have a SRP527W running a ADSL based broadband connection currently, we would like to switch to using FTTC for the internet link.

I have found through these forums how to enable the 4th ethernet port as the WAN interface but cannot see how we can then specify the PPPOE settings required for FTTC.

Is this possible on the SRP527W or the other SRP520 range?

Thanks

Gary

1 Accepted Solution

Accepted Solutions

Andrew Hickman
Cisco Employee
Cisco Employee

Hi Gary,

The option should be right there for you.

Log in as admin/

Disable ADSL (to enable the 4th LAN port as the WAN interface)

Then from the quick setup (or Interface Setup) page, you can configure PPPoE:

Hope that helps,

Andy

View solution in original post

2 Replies 2

Andrew Hickman
Cisco Employee
Cisco Employee

Hi Gary,

The option should be right there for you.

Log in as admin/

Disable ADSL (to enable the 4th LAN port as the WAN interface)

Then from the quick setup (or Interface Setup) page, you can configure PPPoE:

Hope that helps,

Andy

Now I feel silly, it was right under my nose.

Thanks