06-18-2014 07:15 AM
Hello,
We have a Microsoft DHCP server which has run out of addresses on our current /24 scope. I have created a superscope, with another /24 address in DHCP, and we have an RV215W connected to the ISP as a gateway. How do I configure the RV215W to utilize two different LAN addresses for the superscope to allow traffic to pass through a single WAN address on this router.
Ex. Current Scope: x.x.24.0/24
Additional address: x.x.26.0/24
Any help would be greatly appreciated.
Solved! Go to Solution.
06-18-2014 07:31 AM
Hi ,
Your RV215W wont support for secondary IP address , only option for your to expand your subnet mask from 24 to 23 on your LAN interface .
Like XX.XX.24.0/23
Configure your DHCP scope accordingly to support /23 sub net .
HTH
Sandy
06-18-2014 07:31 AM
Hi ,
Your RV215W wont support for secondary IP address , only option for your to expand your subnet mask from 24 to 23 on your LAN interface .
Like XX.XX.24.0/23
Configure your DHCP scope accordingly to support /23 sub net .
HTH
Sandy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide