Typo error in manufacturing data sheet AIR-PWRINJ6=

[vijayabalan pandy]

Can Cisco confirm that power injector AIR-PWRINJ5 and AIR-PWRINJ6 have same power connectors C14, because as per data sheet from Cisco portal AIR-PWRINJ5 had C14 and the new one AIR-PWRINJ6 had C13 in data sheet. please confirm and share the correct the one to my email id vijayabalan.pandy.ext@siemens-healthineers.com

[balaji.bandi]

I used both :

AIR-PWRINJ5 - C14

AIR-PWRINJ6  - C13

may be below guide help you :

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/power/guide/air_pwrinj6.html

https://www.cisco.com/c/en/us/td/docs/wireless/power/quick/guide/pwrinj5.html

[vijayabalan pandy]

Typo error in AIR-PWRINJ6 data sheet and it was C14 confirmed by Cisco. Cisco need to correct. since we are using only C14 power cable on injector side.

[Dustin Anderson]

C14 on the injector taking a C13 cord.

[vijayabalan pandy]

Below image capture from AIR-PWRINJ6 data sheet, power injector side should be C14 not C13. product picture wise it's correct but as per data sheet it was wrong information and confusing, currently we are using the power injector AIR-PWRINJ5 for access point, as per Cisco EOL announcement AIR-PWRINJ5 replaced by AIR-PWRINJ6, by comparing 1 & 1 as per data sheet it's not have identical features.