Very slow WAN speed (RV180)

[Gronaldo1]

My brand new RV180 seems not to be able to exceed 1.1 MB/s WAN download speed. Using a simple Linksys WRT-320N I used to have 5-6 times this speed.

Value is with default settings, various sources (HTTP/NEWS downloads). Trying to improve this wit QoS-settings dows not improve this in any way.

What am I missing here? This cannot be normal, I hope.

Rgds Ronald

[Gronaldo1]

RESOLVED?

Seems to be another firmware bug. After finding a similar posting on low WAN speeds, I changed the DOMAIN name (in LAN network settings, IP4) back to default 'Cisco' and after applying this, speed is back to normal!!

Changing it back to the name I had set originally, does not undo the solution.

Unfortunatly; after a reboot the problem is back!!

I really hope the next firmware (whenever it eventually does get released) resolves the many bug that apparently are in the RV180.

Rgds Ronald

[jonatrod]

Good morning

Thank you for using our forum, my name is Johnnatan  I am part of the Small business Support community.

Hi Ronald, I apologize for the  issues you are having, please call the Small Business Support Center to confirm if this is a bug. Please go here to find the phone number in your country:

https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html , you will see a telephone number list , select your region and contact  us to report it.

Remember you could  overload your device capacity if  it has activated multiple services such as IPS,  multiple tunnel, Ipsec etc. I hope you find this answer useful,

*Please mark the question as Answered or rate it so other users can benefit from it"

Greetings.

Johnnatan Rodriguez Miranda.

Cisco Network Support Engineer.