WAPP4410N shows improper date on Time page

[drussel2]

Image Name: WAP4410N-fw-2.0.2.1-K9.img

Login on to the WAP4410N,

Go to the setup/time page on a Saturday.

Time shows as: 

Current  Time: 2011/09/03 Sta 20:53:36 (-08:00)

"Sta" day?

Also, the timezone is incorrect...

I did select GMT -8:00 Pacific Time, and also the "Adjust for Daylight Savings time)

So, the above time SHOULD be displayed as 2011/09/03 Sat  20:53:36 (-07:00)

If the intention is to show the difference from UTC/GMT.

I tried the  newer version but it's broken big time. :-( I could not use it at all. None of the configuration changes I made would "stick".

[Eric Moyers]

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. FIrst let me thank you for posting your issue here in the Cisco Community Forums.

Thank you for bringing this to our attention. I have checked the newest firmware and this over-site was corrected in this version. I am concerned about your issues with the new firmware that you mentioned. Was not being able to save your configurations the only issue or were there others. Please let me know so that I can help you resolve your problems.

We can try and work through them here in the forums, or if you like you could call into our Support Center and have a case opened so that this issue can be tracked in the system.

Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

[drussel2]

Hello Eric,

Actually, the issues I had with the newer version of the WAP4410N software

was not that the settings could not be saved, they could not be set in

the first place.

On the set up page, I selected a mix of 802.11b/g/n.. I would "save" or go

to another page and come back to the original page and the fields would be

all blank again.

I used the latest Firefox browser on Windows 7, and also the latest Firefox

browser on Apple OS 10.7

On Tue, Sep 13, 2011 at 07:24, emoyers <