RV160 HTTPS port forwarding error

[DorsetDavey]

I have a quite basic set up on my rv160, I don't use VPN so the error I am getting seems a little odd. I am trying to set up HTTPS port forwarding to an internal host. However, when I select HTTPS traffic for both external to internal service I get this error under HTPPS for external interface:

The port of External Service is duplicate with RESTCONF / NETCONF / Remote management / SNMP / OpenVPN!

I am completely snookered now, I have no idea what this means or how to fix it. Anyone can help?

[paul driver]

Hello

---

@DorsetDavey wrote:

I have a quite basic set up on my rv160, I don't use VPN so the error I am getting seems a little odd. I am trying to set up HTTPS port forwarding to an internal host. However, when I select HTTPS traffic for both external to internal service I get this error under HTPPS for external interface:

---

I believe you only need to select an external service so port forwarding is allowing ingress from a external host internally into your lan

[DorsetDavey]

You have to add an internal service to map to, I have attached a screen shot, I wish Cisco would stay out of the small business market if they are going to make it so you need a Cisco engineer to perform such basic operations.

[paul driver]

Hello
Ive never used these boxes however PF principle is relatively the same

If you haven’t already please review RV160 PF 

[DorsetDavey · Accepted solution]

The answer to this issue was to go to (using web management UI) Firewall > Basic Settings ...and then disable RESTCONF & NETCONF (since I didn't them, if you do change the RESTCONF from port 443 to another port number).