10-23-2006 03:06 AM - edited 03-03-2019 02:26 PM
hello, my name is yunchouljung in korea
i have a question about RIP Redistribution in IOS Version 11.1(24)
2501 router
ip subnet-zero
no ip domain-lookup
!
interface Ethernet0
ip address 10.240.252.45 255.255.255.252
ip access-group 119 in
ip access-group 119 out
no ip redirects
no ip proxy-arp
ip route-cache same-interface
bandwidth 10000
!
router rip
version 2
timers basic 10 10 10 10
redistribute static metric 10
passive-interface Serial1
network 10.0.0.0
no auto-summary
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.242.0.5
ip route 10.0.0.0 255.0.0.0 10.242.0.5
ip route 10.242.3.0 255.255.255.0 10.240.252.46
ip route 156.147.0.0 255.255.0.0 10.242.0.5
ip route 165.186.0.0 255.255.0.0 10.242.0.5
ip route 165.243.0.0 255.255.0.0 10.242.0.5
ip route 165.244.0.0 255.255.0.0 10.242.0.5
ip route 192.168.73.0 255.255.255.0 10.242.0.5
BuPyung#sh ip route
Gateway of last resort is 10.242.0.5 to network 0.0.0.0
10.0.0.0/8 is variably subnetted, 4 subnets, 3 masks
S 10.0.0.0/8 [1/0] via 10.242.0.5 <===== "10.0.0.0/8" routing
C 10.240.252.44/30 is directly connected, Ethernet0
S 10.242.3.0/24 [1/0] via 10.240.252.46
C 10.242.0.4/30 is directly connected, Serial1
S 156.147.0.0/16 [1/0] via 10.242.0.5
S 165.186.0.0/16 [1/0] via 10.242.0.5
S 192.168.73.0/24 [1/0] via 10.242.0.5
S 165.244.0.0/16 [1/0] via 10.242.0.5
S 165.243.0.0/16 [1/0] via 10.242.0.5
S* 0.0.0.0/0 [1/0] via 10.242.0.5
3560 L3 SW
interface FastEthernet0/23
description ### to_Router ###
no switchport
ip address 10.240.252.46 255.255.255.252
no ip redirects
no ip proxy-arp
!
router rip
version 2
timers basic 30 30 30 30
passive-interface FastEthernet0/22
passive-interface FastEthernet0/23
passive-interface FastEthernet0/24
network 10.0.0.0
no auto-summary
!
ip classless
ip route 10.254.12.96 255.255.255.255 10.240.252.173
ip route 10.255.10.31 255.255.255.255 10.240.252.173 name RPMS_Services
BuPyung_L3#sh ip route
Gateway of last resort is 10.240.252.173 to network 0.0.0.0
R 192.168.73.0/24 [120/10] via 10.240.252.45, 00:00:04, FastEthernet0/23
R 156.147.0.0/16 [120/10] via 10.240.252.45, 00:00:04, FastEthernet0/23
10.0.0.0/8 is variably subnetted, 7 subnets, 3 masks
C 10.240.252.44/30 is directly connected, FastEthernet0/23
S 10.254.12.96/32 [1/0] via 10.240.252.173
C 10.240.252.172/30 is directly connected, FastEthernet0/24
S 10.255.10.31/32 [1/0] via 10.240.252.173
C 10.242.3.0/24 is directly connected, Vlan3
R 10.242.0.4/30 [120/1] via 10.240.252.45, 00:00:04, FastEthernet0/23
R 10.254.10.0/24 [120/1] via 10.240.252.173, 00:00:10, FastEthernet0/24
R 165.244.0.0/16 [120/10] via 10.240.252.45, 00:00:04, FastEthernet0/23
R 165.243.0.0/16 [120/10] via 10.240.252.45, 00:00:04, FastEthernet0/23
R 165.186.0.0/16 [120/10] via 10.240.252.45, 00:00:04, FastEthernet0/23
R* 0.0.0.0/0 [120/1] via 10.240.252.173, 00:00:10, FastEthernet0/24
BuPyung_L3#
routing table in 3560 L3 SW is not show static rip entry from 2501 Router
S 10.0.0.0/8 [1/0] via 10.242.0.5
why 10.0.0.0/8 network is not see?
10-26-2006 11:11 AM
The basic timing parameters for RIP are adjustable. Because RIP is executing a distributed, asynchronous routing algorithm, these timers must be the same for all routers and access servers in the network.
Are you even peering at all with the 2501? I don't think you are learning any routes at all from it?
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide