Thanks guys,
As stated above, no changes to this switch was made except for removing auto qos and changing all the access ports to VLAN 60. Nothing on the trunk ports or the core switch port that this switch is connected to has changed and shouldn't need to change.
My sh vlan brief command shows all 48 ports in VLAN 60. Here is the output of the show platform forward command:
sh platform forward gi0/1 vlan 60 04da.d27a.e8b1 0023.eb13.66b0
Ingress:
Global Port Number: 49, lpn: 1 Asic Number: 0
Source Vlan Id: Real 60, Mapped 8. L2EncapType 0, L3EncapType 3
Hashes: L2Src 0x00 L2Dst 0x0F L3Src 0x00 L3Dst 0x0F
Lookup Key-Used Index-Hit A-Data
Classify 68_0C700023_EB1366B0-00_000004DA_D27AE8B1 00BFC 00000000
InputACL 20_0C700023_EB1366B0-00_000004DA_D27AE8B1 00BF8 01000000
L2LrnMsk FF_03FFFFFF_FFFFFFFF-00_000003FF_00000000
L2Learn 83_000804DA_D27AE8B1-C3_00002031_00000000 01D90 00000060
L2FwdMsk FF_03FFFFFF_FFFFFFFF
L2Fwd 83_00080023_EB1366B0 0138F 000000C1
Station Descriptor: F031F008, DestIndex: F031, RewriteIndex: F008
==========================================
Egress: Asic 0, switch 1
Source Vlan Id: Real 60, Mapped 8. L2EncapType 0, L3EncapType 3
portMap 0x2, non-SPAN portMap 0x2
Output Packets:
------------------------------------------
GigabitEthernet0/1 Packet 1
Lookup Key-Used Index-Hit A-Data
OutptACL 30_0C700023_EB1366B0-00_000004DA_D27AE8B1 00BFC 01000000
Dropped due to failed deja vu check.
Here is the output of the show interface trunk on my STP forwarding port:
sh int gi0/1 trunk
Port Mode Encapsulation Status Native vlan
Gi0/1 on 802.1q trunking 1
Port Vlans allowed on trunk
Gi0/1 1-4094
Port Vlans allowed and active in management domain
Gi0/1 1-3,7-8,10,30,60,70,88,103,111,128,200,202-203,206,208,650,666,999
Port Vlans in spanning tree forwarding state and not pruned
Gi0/1 1-3,7-8,10,30,60,70,88,103,111,128,200,202-203,206,208,650,666,999
Let me also say that this switch has never had any of its ports in VLAN 60; they were either in VLAN 1 or a trunk port for APs with multiple SSIDs.
