3560 switch and internet DNS error

[joel75941]

Hi all,

In reference to the following link:Configure InterVLAN Routing on Layer 3 Switches - Cisco

After setting up ip routing on the switch, the router I connected it to was a non-cisco device.  The router definitely has no problem connecting to the internet, and as far as I know the configuration for the switch is correct.  I can:

1) ping other host devices between vlans

2) ping the router's gateway

3) ping out to the internet (yahoo's ip address for example, 46.228.47.115). 

However, I get an error telling me that the DNS server isn't responding, and as such I do not have an internet connection on any of my host devices.  The DNS server used in my static IPv4 config is a basic google DNS 8.8.8.8.  Can anyone help me?  I'm not sure what the problem here could be...thanks.

[Philip D'Ath · Accepted solution]

It may be that this product is not capable of doing this.

Are you able to configure it to NAT the additional subnets?

[joel75941]

I'm going to try to play with this E1200 some more, but you're right; It's the router. 

I just hooked up an old WRT54G router with the same factory defaults and routing table and it works.  FFS so much time wasted... =/

EDIT:  Thank you both for your time and expertise.  This could've ended horribly for this switch otherwise.