05-14-2015 01:27 PM - edited 03-05-2019 01:28 AM
Hello.
First time, turned on 3650 for first time and all went well.
Second time I started to see stange messages about poe being enabled and disabled.
Third time a got a loop boot; after 5 reboots it goes to rommon. I tried to boot from usb with a bin file (cat3k_caa-universalk9.SPA.03.06.00.E.152-2.E.bin) but I allways get the same error output:
FIPS(NGWC): Flash Key Check : Begin
FIPS(NGWC): Flash Key Check : End, Not Found, FIPS Mode Not Enabled
May 14 20:03:42 %FED-3-INIT_FAILED: Module Pre-XCVR failed initiMay 14 20:03:42 %STACKMGR-1-RELOAD: Reloading due to reason
May 14 20:03:42 %IOSXE-2-PLATFORM: process ng_dumper: Process fed: terminated abnormally.
May 14 20:03:43 %IOSXE-2-PLATFORM: process fed: ===================== Exception Data ====================
May 14 20:03:43 %IOSXE-2-PLATFORM: process fed: Exception in 'fed' with Signal=SIGABRT(6)
May 14 20:03:43 %IOSXE-2-PLATFORM: process fed: Frame Pointer=0x7FBBDC50, Program Counter=0x2E4523B0
May 14 20:03:43 %IOSXE-2-PLATFORM: process fed: Thread ID=5773: -Traceback= 1#91eacdd5ab5f666143bd602d5d412438 pthread:2E440000+123B0
May 14 20:03:43 %IOSXE-2-PLATFORM: process fed:
<Thu May 14 20:03:42 2015> Message from sysmgr: Reason Code:[2] Reset Reason:Service [fed] pid:[5773] terminated abnormally [6].
Details:
--------
Service: fed
Description: Forwarding Engine Driver
Executable: /tmp/sw/mount/cat3k_caa-platform.SPA.03.06.00E.pkg//usr/binos/bin/fed
Started at Thu May 14 20:03:12 2015 (423633 us)
Stopped at Thu May 14 20:03:42 2015 (449339 us)
Uptime: 30 seconds
Start type: SRV_OPTION_RESTART_STATELESS (23)
Death reason: SYSMGR_DEATH_REASON_FAILURE_SIGNAL (2)
Last heartbeat 0.00 secs ago
PID: 5773
Exit code: signal 6
CWD: /var/sysmgr/work
PID: 5773
UUID: 3005
get_local: failed: No such file or directory
Unmounting ng3k filesystems...
Unmounted /dev/sda3...
Warning! - some ng3k filesystems may not have unmounted cleanly...
Please stand by while rebooting the system...
Restarting system.
Does anyone know how to fix this? I cannot find any solution for this. The switch is new and I am thinking on a RMA because of DoA.
Thanks and Regards,
João.
05-14-2015 08:02 PM
get_local: failed: No such file or directory Unmounting ng3k filesystems... Unmounted /dev/sda3... Warning! - some ng3k filesystems may not have unmounted cleanly...
The firmware could be corrupt.
05-15-2015 01:13 AM
Hello Leo.
I thought about that and that is why I tried to boot from usbflash but still the same error. MD% checksum shows that usb file is ok.
I will probably to a DoA request.
Thanks,
João.
06-26-2015 05:19 AM
meet same issue,anybody can help?
06-26-2015 07:41 AM
Hello,
I opened a TAC case and they considered that it was a hardware problem and replaced the switch.
Regards,
Joao.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: