4507E WCCP Support

eToro_ISR · ‎12-09-2012

Hi Guys,

For some reason I don't have the WCCP feature on my 4507E Layer3 Switch.

What can be the cause of that?

This is my sh ver:

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)

Compiled Thu 27-Jan-11 12:19 by prod_rel_team

Image text-base: 0x10000000, data-base: 0x12C41C68

ROM: 12.2(44r)SG5

Darkside Revision 4, Nexu Revision 9, Fortooine Revision 1.22

ISR-SW-BACKBONE uptime is 48 weeks, 6 days, 20 hours, 6 minutes

Uptime for this control processor is 38 weeks, 1 hour, 1 minute

System returned to ROM by RPR Switchover

System restarted at 17:39:55 GMT Sun Mar 18 2012

System image file is "bootflash:cat4500e-ipbasek9-mz.122-54.SG1.bin"

Last reload reason: Unknown reason

cisco WS-C4507R-E (MPC8548) processor (revision 8) with 524288K bytes of memory.

Processor board ID FOX1445GBLK

MPC8548 CPU at 1GHz, Supervisor 6L-E

Last reset from Reload

21 Virtual Ethernet interfaces

112 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

Thanks

Reza Sharifi · ‎12-09-2012

Hi,

It seems that your Sup does not support it:

MPC8548 CPU at 1GHz, Supervisor 6L-E

from the config guide:

Catalyst 4900M, Catalyst 4948E, Supervisor Engine 6-E, and Supervisor Engine 6L-E do not support WCCP Version 2.

more info here:

Also your config-register should be 0x2102

HTH

eToro_ISR · ‎12-09-2012

Thank you for the quick reply!

Does GRE supported?