09-28-2020 12:58 PM
Hi, I am experimenting with 4G LTE cards - both EHWIC-4G-LTE-GB and C887VAG-4G
The result of sh cell x radio gives me the following information about both the cell site the radio is attached to, and tells me three cell sites are detected and usable:
Idx PCI (Physical Cell Id)
---------------------------
1 252
2 236
3 334
I know that you can carry out a PLMN scan to detect all available networks and radio technologies, and can manually tell the modem to attach to a particular one of these (or use force mode, or auto). What I would also like to do is tell the modem to attach to a particular one of the three cells above - is this possible? I can't find any info on this...
Cheers, Bill
10-01-2020 03:39 PM
Hello there,
Please review the link above (Selecting the Network) and test the following commands, those should be supported:
10-03-2020 12:33 AM
Hi and thanks... These commands force attachment to a particular carrier, as far as I can see - but I don't think they will force attachment to a particular cell site?
Cheers!
10-03-2020 02:47 AM
- I don't think the 4g-protocol has support for that,
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide