Resolved! VLANS,EIGRP and DHCP
Guys I need help configuring the eigrp I can't seem to get it working here's what Ive done so far....1) subnet appropriately2) Configure EIGRP3) Configure DHCP
Guys I need help configuring the eigrp I can't seem to get it working here's what Ive done so far....1) subnet appropriately2) Configure EIGRP3) Configure DHCP
Hi All, I need my CORP lan to ping the server and pc's within their ranges. I am unable to get this to work despite looking at static routing and acl rules. I have attached the PKT file and all passwords are "cisco". If you are able to get it pinging...
Hi all, I have a task to setup remote access for a router 819 with a SIM card. So can this router setup AnyConnect for remote access? If not, do we have another solution ? Thank you so much for your support. Cheer,Long
We have out connection as below.Core 1 and Core 2 has a default route to firewall. Users behind the core switches are experiencing packet loss/call quality issues during zoom call. When the user connects directly to L2 switch, with default gateway as...
Need help to understand what does Redistribute static and redistribute connected do under address-family ipv4 vrf Vrf_nameDoes Redistribute static will leak the route from global routing table into vrf routing table and Redistribute connected can do ...
Hello everybody. I have a question about anycast-rp on a pair of Nexus in VPC.I'm reading this guide:https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/multicast/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Ro...
Hello , ASR 9000 (ios-xr) doesnt have ipsla command.can anyone let us know what is the issue and how to fix,version is 6.1.4 Thanks
Hi AllI just got one Cisco 2960x switch & 2 Fortinet 80E firewalls from my work for learning purpose. I want to setup HA using two Fortinet 80E's. I can figure out HA part but where i am stuck right now is connecting Optimum TM1602 ISP modem to Cisco...
Goode morning, I wanted to know how to install license XXXX.lic for Cisco router ASR 1001-XConfiguration syntax, the command needed to install licenseIs there a detail guide for asr router
I have a four-router network set up in packet tracer. Two of the routers are set up with Se 0/2/0 and Se 0/2/1 and the rest are through gig ports. The Win router is supposed to be able to ping the Cal router if Se 0/2/0 is connected or not. It works ...
Hello Expert, I using a 892 router and would like to create site to site vpn using DH group 14but this not displayed as an option only DH group 5 is visible.Is DH group 14 support o the model router and if it is how to enable same. RegardsJomo
Hello, hope there'd be someone to share some "CISCO luminous sparks" in my network issue.I have a network where we plan to configure three VLANs for our internal network using private ip address space.We are using an ISR Cisco 892 FSP router which ha...
I'm trying to set up multiple subnets on different layer 3 switches to the internet and I'm not able to get it working. The directly connected Layer 3 3560 cx Cisco Switch is able to ping the Netgear Nightawk RAX80 router interface and 8.8.8.8 as wel...
Hi All We are planning to buy ASR920 can someone please help me to understand the Inline below and purpose of the licence. SP-AR3-ASR920ZDSP-AR3-ASR920SI Both Looks like a contract for Hardware support but not sure.
Hi FriendsI have taken Cisco IOS backup using TFTP server, using the commandCopy flash tftp Now i need to restore the backup IOS file again from TFTP server to flash.but my flash drive is not having enough space.so if i delete current IOS file in fla...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-05-2025 03:27 AM | ||
| 11-13-2025 04:57 PM | ||
| 11-09-2025 09:51 PM | ||
| 11-06-2025 06:09 PM | ||
| 10-26-2025 02:24 AM |
| User | Count |
|---|---|
| 5 | |
| 3 | |
| 3 | |
| 2 | |
| 1 |