I have a 5510 with dynamic NAT and serveral static translation. The dynamic NAT is working fine, but for some reason I only see untranslate hits from the Static NAT translation and no translate:
match ip inside host 192.168.24.65 outside any
static translation to 72.233.68.6
translate_hits = 0, untranslate_hits = 899
match ip inside host 192.168.24.20 outside any
static translation to 72.233.68.10
translate_hits = 0, untranslate_hits = 572
match ip inside any outside any
dynamic translation to pool 1 (72.233.68.2 [Interface PAT])
translate_hits = 7035, untranslate_hits = 58
My nat configuration is as follows:
nat (DMZ) 0 access-list no-nat
nat (DMZ) 1 0.0.0.0 0.0.0.0
nat (inside) 0 access-list no-nat
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 72.233.68.5 192.168.24.5 netmask 255.255.255.255 dns
static (inside,outside) 72.233.68.6 192.168.24.65 netmask 255.255.255.255 dns
static (inside,outside) 72.233.68.10 192.168.24.20 netmask 255.255.255.255
access-list no-nat extended permit ip 192.168.24.0 255.255.255.0 10.1.24.0 255.255.255.0
Any ideas what dcould be causing this? Client cant get thru to there servers.