01-16-2012 11:21 PM - edited 03-04-2019 02:55 PM
But I can apply that same policy on the same interface (just different sub-interface).
Im getting an error of:
(config-subif)#service-policy output 8M
Police and strict priority must be configured together for egress QOS.
Invalid feature combination for the class VOICE
Configuration failed!
But I can attach this policy into other sub-interface on the same physical interface.
Anyone encountered the same problem?
Thanks
01-17-2012 01:37 AM
I tried doing tests again...
I tried shutting down interface first...still the same.
I created new sub-interfaces and apply this new policy, and its good....
Actually one old same policy, just different shape rate is applied to one sub-interface and is working years now...
Applying this old policy to this specific sub-interface dont really works...Im getting the message above....
Need your comments guys....
thanks
01-17-2012 03:06 PM
Remaining problem as of the moment is on the 7200.
After applying a new policy to one interface facing LAC, im getting the error below:
(config-subif)#service-policy output LNS-LAC
user-defined classes with queueing features are not allowed in a service-policy at sub-interface/pvc
in conjunction with session based queueing policy
7200 is running as LNS/L2TP. And Im trying to apply egress QOS on interface facing the LAC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide