02-16-2011 09:57 AM - edited 03-04-2019 11:26 AM
Hello All,
I have configured the "ISP" part of the VDSL as i am a tech for the ISP that has access to this, but i am not able to get my 887V to synch is there something i am doing wrng within the Cisco, i have included a debug and couple more things .. just have no clue why this is not working.
Thank You Pat
887V#sh debugging
VDSL 0 daemon:
VDSL daemon error condition debugging is on
VDSL daemon interface function debugging is on
VDSL daemon state machine debugging is on
VDSL VDSL 0 ipc:
VDSL IPC error debugging is on
VDSL IPC Rx debugging is on
VDSL IPC Tx debugging is on
VDSL VDSL 0 mbx:
VDSL mailbox error debugging is on
VDSL mailbox Rx debugging is on
VDSL mailbox Tx debugging is on
VDSL 0 training log:
VDSL training log is on
*Feb 16 17:24:07.259: VDSL 0: vdsl line state : discovery
*Feb 16 17:24:07.259: VDSL 0: SM_LINE_TRAIN boolean event
*Feb 16 17:24:07.259: vdsl_daemon_sm VDSL 0: during state training, got event 17(line_training)
*Feb 16 17:24:07.259: @@@ vdsl_daemon_sm VDSL 0: training -> training
*Feb 16 17:24:13.271: ipc VDSL 0: vdsl_notif_interrupt, Sending LINE_STATE to VDSL Daemon, state = 7
*Feb 16 17:24:13.271: VDSL 0: vdsl line state : fullinit
*Feb 16 17:24:15.299: VDSL 0: SM_LINE_DOWN boolean event
*Feb 16 17:24:20.019: mbx VDSL 0: vdsl_msg_rcv_isr, Desc@ 604 : hdr= E004, total len= 28, msg len= 28, @618
*Feb 16 17:24:20.019: mbx VDSL 0: vdsl_msg_rcv_isr, Notification msg type 4, len= 28
*Feb 16 17:24:20.019: mbx VDSL 0: vdsl_process_msg_rcv, First message (1) : addr= 0x618, dest= 0x0xEE010E0, len= 28 00x 04x 11x 02x 00x 127x 00x 127x 00x 64x 4294967201x 4294967184x 00x 00x 00x 00x 42x
*Feb 16 17:24:20.023: 4294967243x 4294967204x 4294967280x 00x 00x 00x 00x 00x 00x 00x 00x
*Feb 16 17:24:20.023: mbx VDSL 0: vdsl_process_msg_rcv, Last message (2) : addr= 0x618, dest= 0xEE010FC, len= 28
*Feb 16 17:24:20.023: mbx VDSL 0: vdsl_msg_rcv_complete, call msg 4 rx handler, err= 0, len= 28, 0xEE010E0
*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_msg_rcv_isr, Desc@ 60E : hdr= E004, total len= 28, msg len= 28, @618
*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_msg_rcv_isr, Notification msg type 4, len= 28
*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_process_msg_rcv, First message (1) : addr= 0x618, dest= 0x0xEE010E0, len= 28 00x 04x 11x 02x 00x 127x 00x 127x 00x 64x 4294967201x 4294967184x 00x 00x 00x 00x 42x
*Feb 16 17:24:50.059: 4294967243x 4294967204x 4294967280x 00x 00x 00x 00x 00x 00x 00x 00x
*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_process_msg_rcv, Last message (2) : addr= 0x618, dest= 0xEE010FC, len= 28
*Feb 16 17:24:50.059: mbx VDSL 0: vdsl_msg_rcv_complete, call msg 4 rx handler, err= 0, len= 28, 0xEE010E0
*Feb 16 17:24:55.307: ipc VDSL 0: vdsl_notif_interrupt, Sending LINE_STATE to VDSL Daemon, state = 8
887V#sh controllers vdsL 0
Controller VDSL 0 is DOWN
Daemon Status: Establishing Link
XTU-R (DS) XTU-C (US)
Chip Vendor ID: 'BDCM' 'IKNS'
Chip Vendor Specific: 0x0000 0x0100
Chip Vendor Country: 0xB500 0xB500
Modem Vendor ID: 'CSCO' 'IKNS'
Modem Vendor Specific: 0x4602 0x0100
Modem Vendor Country: 0xB500 0xB500
Serial Number Near: FHK1415724TCISCO731141205
Serial Number Far:
Modem Version Near: 15.0(1)M
Modem Version Far: 0x0100
Modem Status: Idle
DSL Config Mode: AUTO
Trained Mode:
TC Mode: PTM
DELT configuration: enabled
DELT state: in progress
Trellis: OFF OFF
Full inits: 0
Failed full inits: 0
Short inits: 0
Failed short inits: 0
Firmware Source File Name (version)
-------- ------ -------------------
VDSL user config flash:vdsl.bin.A2pv6C016a1.d22e.IOS1501M1 (10)
Modem FW Version: 100204_1318-4.02L.01.A2pv6C016a1.d22e0
Modem PHY Version: A2pv6C016a1.d22e0
Training Log : Started
Training Log Filename : flash:vdsllog.bin
887V#show diag 0
Slot 0:
C887VDSL2 Mainboard Port adapter, 6 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Chassis MAC Address : 68ef.bd69.512e
PCB Serial Number : FO6140901M7
Hardware Revision : 1.0
Processor type : B4
Part Number : 73-11412-05
Board Revision : A0
Deviation Number : 0
Fab Version : 04
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
MAC Address block size : 14
Chassis Serial Number : FHK1415724T
Product (FRU) Number : CISCO887V-K9
Version Identifier : V01
Radio Country Code : FFFF
Top Assy. Part Number : 800-31524-01
CLEI Code : VAMLE10CRA
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C3 06 68 EF BD 69 51 2E C1 8B 46 4F 36 31
0x10: 34 30 39 30 31 4D 37 40 06 4D 41 01 00 09 B4 82
0x20: 49 2C 94 05 42 41 30 88 00 00 00 00 02 04 03 00
0x30: 81 00 00 00 00 04 00 43 00 0E C2 8B 46 48 4B 31
0x40: 34 31 35 37 32 34 54 CB 92 43 49 53 43 4F 38 38
0x50: 37 56 2D 4B 39 20 20 20 20 20 20 89 56 30 31 20
0x60: D9 03 40 C1 C2 4A FF FF C0 46 03 20 00 7B 24 01
0x70: C6 8A 56 41 4D 4C 45 31 30 43 52 41 FF FF FF FF
0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
887V#
02-16-2011 01:42 PM
Hello Pat,
have you got a different VDSL modem that is able to synchronize?
VDSL performances are influenced by line conditions, the line may be too bad for it or there is a problem of interoperability with CO.
you should contact who is providing the VDSL service ( it not clear if it is a different company or a different group in your company)
Hope to help
Giuseppe
02-17-2011 04:36 AM
Hello Giuseppe,
have you got a different VDSL modem that is able to synchronize?----> No I Do not.
VDSL performances are influenced by line conditions, the line may be too bad for it or there is a problem of interoperability with CO.-----> This is fine i am les then .5km from the remote Co with VDSL E.Q
you should contact who is providing the VDSL service ( it not clear if it is a different company or a different group in your company)---->This is within the company i work in,so all the stasts for the LINE are fine.. i even brought my Router to the D-mark outside to see is it worked No luck..
This si how the ISP side is Configured for VDSL:
PTM encap = 64-65
Upbo = auto
band plan 998
U0 Band a-25-183
line code vdsl2
region = annex A
profile p12a
trellis encoding and bit swapping are on.
card is a stigner VDSL2-IK-GEB
So th Question remains, does the Cisco 887VDSL need to have configuration with in the cisco for it Synch up???
02-25-2011 06:19 AM
Anybody have an answer to this by any chance.. ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide