04-28-2012 06:06 AM - edited 03-04-2019 04:11 PM
Hi Experts
i have an ACL 150 applied to Gi0/0 inbound direction, with a log keyword on the deny line,now how can i see the effects of this ACL,i mean the src address being blocked by acl
thanks
jamil
04-28-2012 06:08 AM
Jamil,
It will either log to your buffer or wherever you're sending your logs (if you're using a syslog server). You can do a show log to see the results usually.
HTH,
John
04-28-2012 06:40 AM
Hi John
thanks for ur reply
i dont have a syslog server!
Can we go further, i need to debud this ACL ?
jamil
04-28-2012 06:43 AM
Try just "show log" on the router.
04-28-2012 10:05 AM
Hi Ibrahim,
You should have activated the logging to the buffered. In addition, you should configure the log to debugging severity level if you need to also log the debug outputs.
Finally, I would recommned to increase the buffer size to a higher value than the default (4096) in order to avoid overwriting the logs
logging buffered [buffer-size| level]
level=7 debugging
Hope that helps,
Vasilis
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide