cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
714
Views
5
Helpful
1
Replies

Add PVDM3-32 in Cisco 2911

johnlloyd_13
Level 9
Level 9

hi,

i'll need to add PVDM3-32 in 2911. currently, it has PVDM3-16. i know there are 2x PVDM slots in the motherboard.

my question are:

1. do i insert the new PVDM3-32 in the spare (second) slot? will this add up 48 channels (16 + 32) or just a maximum of 32?

2. do i remove the PVDM3-16 and replace it with PDVM3-32? or keep PDVM-16 inserted for cold spare?

 

2911#sh inv
NAME: "CISCO2911/K9", DESCR: "CISCO2911/K9 chassis, Hw Serial#: FGL1835112U, Hw Revision: 1.0"
PID: CISCO2911/K9 , VID: V07 , SN: FGL18351234

NAME: "PVDM3 DSP DIMM with 16 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 16 Channels"
PID: PVDM3-16 , VID: V01 , SN: FOC1833ABCD

NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC , VID: V05 , SN: DCA1828RXYZ

1 Reply 1

marce1000
VIP
VIP

 

                         - Check these notes :

  https://www.cisco.com/c/en/us/td/docs/routers/access/2900/hardware/installation/guide/Hardware_Installation_Guide/Internal_Modules.html#10254

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card