09-07-2008 04:09 PM - edited 03-03-2019 11:26 PM
Hi,,
I'm trying to setup cisco 1801 router with adsl port to internet, I had contacted my ISP about the pvi/cvi setting and i get 100/100.
when i tried to implement the PVC 100/100 it is only accepts 0-31 for the PVI is there any way to get over theis issue, My ios ver is 12.4(15)T6.
Regards fo all
Solved! Go to Solution.
09-08-2008 02:52 AM
Hello Osama,
try the following
atm vc-per-vp 256
to change the number of VCI per VP and see if it changes the allowed range of VPI
Hope to help
Giuseppe
09-08-2008 02:52 AM
Hello Osama,
try the following
atm vc-per-vp 256
to change the number of VCI per VP and see if it changes the allowed range of VPI
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide