Here is the basic design. The reason for using the ONT and OLT is the distance factor.
I want to ping the host at 192.168.10.12 from the core switch's access port on VLAN 10 (192.168.10.11).
The L2 switch is configured with three VLANs and has a trunk port to pass the VLANs to the ONT. Also, the core switch is configured with SVI. Now, I need help to make the ONT and OLT work in this scenario.
Any help would be appreciated. I am new to networking and have these physical devices available.
and mgmt on the l2 switch to access it's gui to manage it remotely.
