cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
645
Views
0
Helpful
3
Replies

ASA Config -- extra entries added automatically after config loads?????

djgriggs1
Level 1
Level 1

 

asa5516 added the following entries to the running-config ( how , where from ) this was not part of the config...

This should not be there it was not part of the config template that was created.

 

 policy-map type inspect dns migrated_dns_map_1
  parameters
    message-length maximum client auto
    message-length maximum 512
    no tcp-inspection

 

 policy-map global_policy
   inspect dns migrated_dns_map_1
   inspect ftp
   inspect tftp

 following lines were entered by asa
      policy-map type inspedct dns migrated_dns_map_2
         parameters
           message-length maximum client auto
           message-length maximum 512
           no tcp-inspection

3 Replies 3

That was probably part of the factory-default config. You have to remove/modify it based on your needs.

Karsten,  

 

I am loading my Config to startup-Config. Which seems to work on the ads 5515 with no issue.

 

so I would not think that it would add in with my loaded config

After further research it appears that the ads is setting a default policy even after I load a config. Working on how to prevent this and load what is in the config file only
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card