When i configure one of ethernet interfaces on ASA 5510 as DHCP client it obtaines the lease from DHCP server but it does not release the lease even if i disconnect the interface from the network it stays in "RENEWING" state and show it in ASDM DHCP monitoring section, to renew the ip address someone has to issues the command or press "RENEW IP ADDRESS" button in ASDM.
This behaviour in causing great trouble for me and preventing ASA to be deployed in my infrastructure.
The current software Image is 7.2.2
Has anyone experience such behaviour or have any solution to it?
Yes it is connected to DSL MODEM which is in half bridge Mode also Ethernet interface is configured as DHCP server. but if the Modem goes down, the ASA still hold the Lease forever and does not renew it once the modem comes back.
Cisco DNA Center
What's new in Cisco DNA Center 2.1.2
Cisco DNA Center 2.1.2.x Features and Capabilities
Cisco DNA Center -Intent Based Networki...
A major international airport is looking to build a cutting-edge new terminal, designed to run 24/7 with no interruptions. With the airport always on round the clock, a critical component required to support this is the surveillance infrastructure, which ...
Dear expert,I am facing an issue which you may come across before. Grateful if you would teach me how to do it.I have a Cisco WS-C3650-24TS switch in MZ which I would like to configure so that on the GigabitEthernet1 / 0/1 portis configured with VLAN 100,...
Hi AllWe are looking at some new switches for our top of racks in our DC.We have looked at the 9300 series UX models with the big buffers which is classed as a high scale model.I have tried to look at some Nexus models for top of rack, but there appears t...